DIY Classic Star Wars Project Coasters ~ Another Coaster Friday

Star Wars fans LOVE Star Wars! Oh, how the franchise has grown! This Star Wars project comes in the form of a resin coaster! I went with the classic, which might date me, but that what I think of when I hear Star Wars!

Supplies You Will Need

*This blog uses affiliate links. As an Amazon Associate I earn from qualifying purchases.

  • Resin
    • When deciding on which resin to use for your coasters, you need to keep in mind whether you want it just for cold cups or for hot as well.
      • If only for cold drinks, you can be flexible and use whatever brand you like:
      • If you want it to work for both hot and cold drinks, you need to look for a heat resistant resin, like these:
        • FX Poxy ~ According to the manufacturer, this one is heat resistant to 500° F.
        • Stone Coat

*Tip: I printed on a laser printer, but I have been told the inkjet works too. Just be sure to use the right transparency film for your printer.

Here is the Star Wars Project Video Tutorial

Directions for Star Wars Project

1.  Mix your resin according to the package directions – you need at least one ounce for each.

2.  Mix chunky black glitter, chunky silver glitter and fine silver glitter.

3.  Pour into the mold cavities and pop bubbles with lighter.  Allow to cure a minimum of 12 hours.

4.  Print your images out on transparency film.  

5.  With acrylic paint, paint the back of the images and allow to dry.

6.  Mix more resin – one ounce per coaster.  Pour into cavities.

7.  Pop bubbles with lighter.

8.  Slide in the transparency films and press down with your stir stick.  Be sure to make sure all the bubbles are pressed out.

9.  Pop bubbles again and then allow to cure a minimum of 12 hours.

Then unmold them and you have some awesome coasters!!

Star Wars project | Three Star Wars coasters with black glitter backgrounds. One with Darth Vader. One with Han Solo, Chewbacca and Yoda. One with R2 D2 and C3PO.

Other TV and Movie Coasters

Fun Star Wars Gift Ideas

Thanks for stopping by! Remember: Life’s too short not to shimmer, so grab your glue gun and your glitter!™ Stay safe!

Mona

Leave a Comment